Find the Best Solution – Book Your 30-Minute Call Today!
Find the Best Solution – Book Your 30-Minute Call Today!
Skip to content

MASTER-BILT Model No. DD-46 Ice Cream Display Case Dipping Cabinet

$5,781.70

Notify me when back in stock

About this item

DD series dipping/display merchandisers merge ice cream display and storage into one cabinet.

Built for product visibility, each model features a full glass top with unobtrusive aluminum framing as well as standard LED lighting. The rear edge of the cabinet is curved for operator comfort and the back wall is lowered making it easier to bend and reach containers inside. Each model also features 2-1/2” thick polyurethane foamed-in-place walls for maximum insulation and performance.

 

DD-46 Specifications

  • Length: 48-1/4″ (1226 mm)
  • Depth: 27-1/2″ (699 mm)
  • Height: 50″ (1270 mm)
  • Volts: 115
  • Amps: 5.9
  • Unit H.P.: 3/5
  • NEMA Plug Configuration: 5-15P
  • 3 Gallon Can Capacity (Display/Storage): 8/4
  • Ship Weight (lbs) (kg): 407 (184)

 

The following add-ons are available: 

  • A391‐11150 Frost Shield, for DD‐46 
  • A394‐20301 Can Holders, including white can covers 
  • A060‐20400 Dipper Well, with installation kit 

Please contact us if you would like to add to your order.

 

Features

Construction

  • Rounded rear stainless steel heated top improves operator comfort
  • Lower back rail provides improved operator ergonomics
  • Frameless double pane tempered glass viewing window, with NSF51 approved powder coated top and bottom aluminum extruded trims, provides enhanced structural stability and appearance
  • Tempered glass ends improve product visibility
  • Energy efficient, long lasting LED lighting
  • Independent on/off light switch to save energy when not in use
  • Standard electronic controller increases reliability and saves
    energy by maintaining consistent product temperature
  • 24 gauge painted textured interior and exterior
  • Stainless steel top and attached superstructure
  • Stainless steel serving deck
  • Equipped with leveling legs to correct for unlevel flooring
    situations
  • Drain with garden hose connector for ease of cleaning
  • Heavy-duty epoxy-coated wire can support racks
  • 3" thick walls and 21/2" floor with foamed-in-place “zero ODP” urethane insulation

Lids

  • Hinged, high-tensile, transparent acrylic dipping compartment lids with full length handle

Refrigeration

  • Eco-friendly R290 refrigerant
  • Cold wall evaporator provides even temperature throughout with no air blowing across ice cream which can lower product quality
  • Low maintenance condenser coil
  • Condenser filter screen, removable without tools, for easy
    condenser coil cleaning, peak efficiency and extended equipment life (DD-66 and DD-88 models). Screen should be cleaned every three months depending on operating environment.
  • Rear air intake with side and rear discharge eliminates front grille and allows full front of cabinet for graphics
  • Side compartment grille improves the air circulation and accessibility during servicing
  • No minimum clearance required on cabinet sides but front, back and top must be left open for customer and operator access
  • Temperature range: 5° to -5°F (-15° to -21°C) • R-factor (insulation efficiency rating): 19.40

 

Warranty

  • Standard limited two year parts and labor
  • Additional three year coverage on compressor part

    About this item

    DD series dipping/display merchandisers merge ice cream display and storage into one cabinet.

    Built for product visibility, each model features a full glass top with unobtrusive aluminum framing as well as standard LED lighting. The rear edge of the cabinet is curved for operator comfort and the back wall is lowered making it easier to bend and reach containers inside. Each model also features 2-1/2” thick polyurethane foamed-in-place walls for maximum insulation and performance.

     

    DD-46 Specifications

    • Length: 48-1/4″ (1226 mm)
    • Depth: 27-1/2″ (699 mm)
    • Height: 50″ (1270 mm)
    • Volts: 115
    • Amps: 5.9
    • Unit H.P.: 3/5
    • NEMA Plug Configuration: 5-15P
    • 3 Gallon Can Capacity (Display/Storage): 8/4
    • Ship Weight (lbs) (kg): 407 (184)

     

    The following add-ons are available: 

    • A391‐11150 Frost Shield, for DD‐46 
    • A394‐20301 Can Holders, including white can covers 
    • A060‐20400 Dipper Well, with installation kit 

    Please contact us if you would like to add to your order.

     

    Features

    Construction

    • Rounded rear stainless steel heated top improves operator comfort
    • Lower back rail provides improved operator ergonomics
    • Frameless double pane tempered glass viewing window, with NSF51 approved powder coated top and bottom aluminum extruded trims, provides enhanced structural stability and appearance
    • Tempered glass ends improve product visibility
    • Energy efficient, long lasting LED lighting
    • Independent on/off light switch to save energy when not in use
    • Standard electronic controller increases reliability and saves
      energy by maintaining consistent product temperature
    • 24 gauge painted textured interior and exterior
    • Stainless steel top and attached superstructure
    • Stainless steel serving deck
    • Equipped with leveling legs to correct for unlevel flooring
      situations
    • Drain with garden hose connector for ease of cleaning
    • Heavy-duty epoxy-coated wire can support racks
    • 3" thick walls and 21/2" floor with foamed-in-place “zero ODP” urethane insulation

    Lids

    • Hinged, high-tensile, transparent acrylic dipping compartment lids with full length handle

    Refrigeration

    • Eco-friendly R290 refrigerant
    • Cold wall evaporator provides even temperature throughout with no air blowing across ice cream which can lower product quality
    • Low maintenance condenser coil
    • Condenser filter screen, removable without tools, for easy
      condenser coil cleaning, peak efficiency and extended equipment life (DD-66 and DD-88 models). Screen should be cleaned every three months depending on operating environment.
    • Rear air intake with side and rear discharge eliminates front grille and allows full front of cabinet for graphics
    • Side compartment grille improves the air circulation and accessibility during servicing
    • No minimum clearance required on cabinet sides but front, back and top must be left open for customer and operator access
    • Temperature range: 5° to -5°F (-15° to -21°C) • R-factor (insulation efficiency rating): 19.40

     

    Warranty

    • Standard limited two year parts and labor
    • Additional three year coverage on compressor part