About Us Contact Us Shipping Easy Returns Why Buy From Us Price Match Guarantee Privacy Policy Terms of Service
Skip to content
Master-bilt DD-46 ice cream dipping display cabinet

MASTER-BILT Model No. DD-46 Ice Cream Display Case Dipping Cabinet

by MASTER-BILT
$6,010.10

Notify me when back in stock

About this item

DD series dipping/display merchandisers merge ice cream display and storage into one cabinet.

Built for product visibility, each model features a full glass top with unobtrusive aluminum framing as well as standard LED lighting. The rear edge of the cabinet is curved for operator comfort and the back wall is lowered making it easier to bend and reach containers inside. Each model also features 2-1/2” thick polyurethane foamed-in-place walls for maximum insulation and performance.

 

DD-46 Specifications

  • Length: 48-1/4″ (1226 mm)
  • Depth: 27-1/2″ (699 mm)
  • Height: 50″ (1270 mm)
  • Volts: 115
  • Amps: 5.9
  • Unit H.P.: 3/5
  • NEMA Plug Configuration: 5-15P
  • 3 Gallon Can Capacity (Display/Storage): 8/4
  • Ship Weight (lbs) (kg): 407 (184)

 

The following add-ons are available: 

  • A391‐11150 Frost Shield, for DD‐46 
  • A394‐20301 Can Holders, including white can covers 
  • A060‐20400 Dipper Well, with installation kit 

Please contact us if you would like to add to your order.

 

Features

Construction

  • Rounded rear stainless steel heated top improves operator comfort
  • Lower back rail provides improved operator ergonomics
  • Frameless double pane tempered glass viewing window, with NSF51 approved powder coated top and bottom aluminum extruded trims, provides enhanced structural stability and appearance
  • Tempered glass ends improve product visibility
  • Energy efficient, long lasting LED lighting
  • Independent on/off light switch to save energy when not in use
  • Standard electronic controller increases reliability and saves
    energy by maintaining consistent product temperature
  • 24 gauge painted textured interior and exterior
  • Stainless steel top and attached superstructure
  • Stainless steel serving deck
  • Equipped with leveling legs to correct for unlevel flooring
    situations
  • Drain with garden hose connector for ease of cleaning
  • Heavy-duty epoxy-coated wire can support racks
  • 3" thick walls and 21/2" floor with foamed-in-place “zero ODP” urethane insulation

Lids

  • Hinged, high-tensile, transparent acrylic dipping compartment lids with full length handle

Refrigeration

  • Eco-friendly R290 refrigerant
  • Cold wall evaporator provides even temperature throughout with no air blowing across ice cream which can lower product quality
  • Low maintenance condenser coil
  • Condenser filter screen, removable without tools, for easy
    condenser coil cleaning, peak efficiency and extended equipment life (DD-66 and DD-88 models). Screen should be cleaned every three months depending on operating environment.
  • Rear air intake with side and rear discharge eliminates front grille and allows full front of cabinet for graphics
  • Side compartment grille improves the air circulation and accessibility during servicing
  • No minimum clearance required on cabinet sides but front, back and top must be left open for customer and operator access
  • Temperature range: 5° to -5°F (-15° to -21°C) • R-factor (insulation efficiency rating): 19.40

 

Warranty

  • Standard limited two year parts and labor
  • Additional three year coverage on compressor part

About this item

DD series dipping/display merchandisers merge ice cream display and storage into one cabinet.

Built for product visibility, each model features a full glass top with unobtrusive aluminum framing as well as standard LED lighting. The rear edge of the cabinet is curved for operator comfort and the back wall is lowered making it easier to bend and reach containers inside. Each model also features 2-1/2” thick polyurethane foamed-in-place walls for maximum insulation and performance.

 

DD-46 Specifications

  • Length: 48-1/4″ (1226 mm)
  • Depth: 27-1/2″ (699 mm)
  • Height: 50″ (1270 mm)
  • Volts: 115
  • Amps: 5.9
  • Unit H.P.: 3/5
  • NEMA Plug Configuration: 5-15P
  • 3 Gallon Can Capacity (Display/Storage): 8/4
  • Ship Weight (lbs) (kg): 407 (184)

 

The following add-ons are available: 

  • A391‐11150 Frost Shield, for DD‐46 
  • A394‐20301 Can Holders, including white can covers 
  • A060‐20400 Dipper Well, with installation kit 

Please contact us if you would like to add to your order.

 

Features

Construction

  • Rounded rear stainless steel heated top improves operator comfort
  • Lower back rail provides improved operator ergonomics
  • Frameless double pane tempered glass viewing window, with NSF51 approved powder coated top and bottom aluminum extruded trims, provides enhanced structural stability and appearance
  • Tempered glass ends improve product visibility
  • Energy efficient, long lasting LED lighting
  • Independent on/off light switch to save energy when not in use
  • Standard electronic controller increases reliability and saves
    energy by maintaining consistent product temperature
  • 24 gauge painted textured interior and exterior
  • Stainless steel top and attached superstructure
  • Stainless steel serving deck
  • Equipped with leveling legs to correct for unlevel flooring
    situations
  • Drain with garden hose connector for ease of cleaning
  • Heavy-duty epoxy-coated wire can support racks
  • 3" thick walls and 21/2" floor with foamed-in-place “zero ODP” urethane insulation

Lids

  • Hinged, high-tensile, transparent acrylic dipping compartment lids with full length handle

Refrigeration

  • Eco-friendly R290 refrigerant
  • Cold wall evaporator provides even temperature throughout with no air blowing across ice cream which can lower product quality
  • Low maintenance condenser coil
  • Condenser filter screen, removable without tools, for easy
    condenser coil cleaning, peak efficiency and extended equipment life (DD-66 and DD-88 models). Screen should be cleaned every three months depending on operating environment.
  • Rear air intake with side and rear discharge eliminates front grille and allows full front of cabinet for graphics
  • Side compartment grille improves the air circulation and accessibility during servicing
  • No minimum clearance required on cabinet sides but front, back and top must be left open for customer and operator access
  • Temperature range: 5° to -5°F (-15° to -21°C) • R-factor (insulation efficiency rating): 19.40

 

Warranty

  • Standard limited two year parts and labor
  • Additional three year coverage on compressor part

We get it. You have a lot of choices when it comes to online retailers. Here's why we think you should shop with us at Frosty Equipment Store.

  • Free USA shipping. No extra fees. Ever.
  • Price Match Guarantee. Best prices online guaranteed.
  • 30-Day Easy Return Policy. If you are not happy with your product, we'll take it back no questions asked.
  • Great Service. We pride ourselves on providing the best service, anywhere.
  • Your satisfaction guaranteed. We handpick our products for quality, and we know you'll love them. But if something is wrong, we'll fix it.

Shipping is FREE on all orders to customers within the United States.

We don't want to mess around with fine print and extra charges, we like things to be simple and easy. 

 

Want to know about our Returns Policy? Read more here.

 

Order Confirmation:

As soon as you place your order you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorised your credit card for the purchase.  

As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment.  If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.  

If your item(s) are available for immediate shipment (within 5 business days) we will process the charges and get to work preparing your order for shipment.

Order Shipment:

If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.  

We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.  

If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at support@frostyequipmentstore.com.

International Orders:

Please be aware that our products are made specifically for the United States market. This means that they require a 110V electrical system to function correctly. 

Our products have generally not been certified for use with other countries electrical safety standards but all of our products are certified to United States standards.

We will happily ship our fantastic products to international customers. Due to the extremely wide variety of product dimensions we will provide an up to date shipping price quote for you on request.

If you are happy with our shipping quote we will prepare an order and payment though our secure online payment gateway.

Damages:

Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.

If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. 

If your item(s) do arrived damaged please send photos to support@frostyequipmentstore.com, then visit our Returns page and lodge your return claim online.